Star Micronics TSP600 Series - Page 66

– 63 –
PAGE MODE
FUNCTION
Request status
CODE
<EOT>
HEX
04
REMARKS
When the printer receives this command, the printer sends back a
status byte for the current printer condition immediately to the
host.
Note: Printer conditions are reported by the following status
bytes:
Status byte
FUNCTION
Request status
CODE
<ESC> <ACK> <SOH>
HEX
1B 06 01
REMARKS
When the printer receives this command, the printer sends back a
status byte for the current printer condition to the host.
0
Constantly
set at 0
Paper empty
1 : empty
Near-end sensor
1: Near-end
Constantly
set at 1
Constantly
set at 0
Constantly
set at 0
Constantly
set at 0
Constantly
set at 0
01
b7 b6 b5 b4 b3 b2 b1 b0