13-5
13.5 LOGO Capacity
Specifications have been changed for the capacity of logos that can be registered because the printer now
handles 4+4M and 4+8M FLASH configurations and because it is now possible to apply a common F/W for
all locations where this printer will be shipped. This accompanies changes to the Flash configuration to
4+8M (IC04=4M, IC05=8M) on TSP7 incorporating the main PCB. These specifications correspond to F/W
Ver. 5.0 and later.
<Conditions for Changing Logo Capacity>
• Flash Configuration: 4+4M Configuration/4+8M Configuration
• Chinese Character Fonts: Included/Not Included
• Large Font B: Included/Not Included
<LOGO Capacity>
IC05 Chinese
Character
Fonts
Large Font-B Logo Capacity Remarks
4M Not Included Not Included 240KB
Included 176KB
8M Not Not Included 496KB
Included 496KB STD Model
Included Not Included 240KB Model Includes Chinese Character Fonts
Included 176KB
To Next Page
Loading...
