Star Micronics TSP700 Series - Page 38

14-2
When using a USB interface
Switches Content ON OFF
1-1
Emulation Fixed at ON
1-2
Always ON Always used as ON
1-3
Always ON Always used as ON
1-4
Sensor Adjustment Mode Disabled Enabled
1-5 USB Mode See the information below
1-6 USB Mode See the information below
1-7
Always ON Always used as ON
1-8
Always ON Always used as ON
USB Mode Settings (Ver3.2 or Later)
1-5 1-6 USB Mode Remarks
ON ON Mode 0 Printer Class (Old)
OFF ON Mode 2 Vendor Class (New)
ON OFF Mode 1 Printer Class (New)
OFF OFF Reserved (Mode 0)
* USB Mode settings are enabled only when the F/W of the USB I/F card is USB 02.00 or later.
When using a network interface
Switches Contents ON OFF
1-1 Emulation Fixed at ON
1-2 Always ON
Always used as ON
1-3
Always ON
Always used as ON
1-4 Sensor Adjustment Mode
Disabled Enabled
1-5 Always ON
Always used as ON
1-6 Always ON
Always used as ON
1-7 Always ON
Always used as ON
1-8 Always ON
Always used as ON