2-1
2 BASIC SPECIFICATIONS
2.1 Print Specifications
(1) Printing Method: Direct Line Thermal Printing Method
(2) Dot Configuration: 640 Dots/Line
(3) Dot Density: 8 dots/mm (203 dpi)
(4) Printing Region: Maximum 80mm
(5) Printing Format: Maximum 53 columns (12 x 24 fonts)
Maximum 26 columns (24 x 24 Chinese character fonts)
(Only on Chinese character models)
(6) Character Spacing: Programmable
(7) Printing Speed: Max. 1440 dots per line/second (180 mm/second)
However, when using 2-color printing:
Max. 600 dots per line/second (75mm/second)
(8) Paper Feed: Friction Feed Method
Paper Feed Pitch 0.125mm [Motor 2 Steps (1-2 Phase Excitation)
(9) Line Width: With Standard Mode: 4 mm or 3 mm
With ESC/POS Mode: 4.23 mm (1/6 inch) Can be set by command.
(10) Print Head: Line Thermal Print Head
(11) Emulation: Standard Mode
ESC/POS Mode (TM-T88II)
To Next Page
Loading...
