Star Micronics TSP700 Series - Page 50

15-9
15.3.5 Memory Switch 4 (MSW4)
Bit Function 0 1 STAR ESC/POS Note
F
E
D
C
B
A
9
8
7
6
5
4 Print Column Count ESC/POS
Compatible
Maximum Kanji
Column
× ○ *1
3
2 Print Column Count (See Table Below) ○ ○
*2
1 Print Column Count (See Table Below) ○ ○ *2
0 Print Column Count (See Table Below) ○ ○ *2
[*1] • The print column count set by MSW4-4 is a function to maintain compatibility with EPSON printers
and the print columns.
When EPSON compatibility is selected, the predetermined initial values are set for the left margin (GS
L) and print region width (GS W) as shown in the table above. This setting functions to select the initial
value. It is possible to change the set value using a subsequent command.
• MSW4-4 Print Column Details
N3 MSW4-4 Print Region Left Margin Print Region
Width
Font-A Font-B
“0” 0 72mm (576 Dots) 32 Dots 512 Dots 42 Columns 56 Columns
(EPSON
Compatible)
52.5mm (420 Dots) 24 Dots 376 Dots 31 Columns 41 Columns
80mm (640 Dots) 40 Dots 568 Dots 47 Columns 63 Columns
50.8mm (406 Dots) 24 Dots 360 Dots 30 Columns 40 Columns
“1” 1 72mm (576 Dots) 0 Dots 576 Dots 48 Columns 64 Columns
(Max. Column
Count)
52.5mm (420 Dots) 0 Dots 420 Dots 35 Columns 46 Columns
80mm (640 Dots) 0 Dots 640 Dots 53 Columns 71 Columns
50.8mm (406 Dots) 0 Dots 406 Dots 33 Columns 45 Columns
[*2] • MSW4-2 to 0 Print Region Details
N4 MSW4-
2
MSW4-
1
MSW4-
0
Print Region Correspond Roll Paper Width
“0” 0 0 0 72mm (576 Dots) 80mm
“1” 0 0 1 52.5mm (420 Dots) 58mm
“2” 0 1 0 80mm (640 Dots) 82.5mm
“3” 0 1 1 50.8mm (406 Dots) 58mm
“4” 1 0 0 Undefined (72mm) Undefined (80mm)
“5” 1 0 1 Undefined (72mm) Undefined (80mm)
“6” 1 1 0 Undefined (72mm) Undefined (80mm)
“7” 1 1 1 Undefined (72mm) Undefined (80mm)