Star Micronics TUP500 series - 14.11. MSWA

TUP500 Series Product Specifications 14-16
14.10. MSW9
Bit Function OFF/“0” ON/“1” Emulation Note
SL EP EP
F
E
D
C
B
A
9
8
7
6
5
4
3
2
1
0
14.11. MSWA
Bit Function OFF/“0” ON/“1” Emulation Note
SL SP EP
F
E
D
C
B
A NE Sensor Input Signal Level High → NE Output Low → NE Output ○ ○ ○ *4
9 NE Sensor Input Signal Photo-sensor (CN33: NE) Mechanical Sensor (CN32: NE) ○ ○ ○ *3
8
7
6
5
4
3
2
1
0
*3) NE Sensor Input Signal
This function specifies the connection terminal of the NE sensor used.
Valid only when an NE sensor is connected. (The NE sensor is set using DIPSW1-8.) )
*4) NE Sensor Input Signal Level
This function specifies the NE sensor input signal level when NE is outputting.
Valid only when an NE sensor is connected. (The NE sensor is set using DIPSW1-8.) )