TUP500 Series Product Specifications
10-1
10. CIRCUIT GENERAL SPECIFICATIONS
10.1. General Specifications
Items Contents
Interface
Conforms to Centronix Parallel RS-232C Serial (D-SUB25 Pin/D-SUB 9 Pin),
USB, Ethernet
Power Supply (*) DC +24V±10% (A separate power unit for power supply is required)
Current Consumption When Idling Average Approx. 0.1A
At 24V, 25ºC, Standard Print
Density
When printing See Table 10.1
Ambient Operating Conditions Temperature 0ºC to +50ºC
Humidity 10% to 80% RH (No condensation)
Ambient Storage Conditions Temperature -20ºC to +60ºC
Humidity 10% to 90 % RH(No condensation)
External Dimensions 78 mm x 118 mm
Mass Approx. 75 g
Board CPU R5F61656CN35FTV
Gate Array uPD65943GC-F36-YEB-A
Clock Frequency CPU operting frequency 32 MHz (Clock 16MHz)
Flash ROM 16 M bits loaded
RAM 2 M bits x 2 pcs. loaded
(*) The board unit should always be screwed to the frame ground.
(*) Connect a capacitor higher than 3300 μF to a 24V system on the power connector side.
Table 10.1 Current Consumption when Printer is Operating
Print Rate
ASCII Continuous Printing
(Print Rate: Approx. 17.5%)
100% Duty Continuous Printing
(Matte Black Printing)
High-Speed Mode
Average: Approx. 1.7A
Peak: Approx. 5.2A
Averag: Approx. 4.4A
Peak: Approx. 7.4A
2 Color Printing Mode
Average: Approx. 1.4 A
Peak: Approx. 5.9 A
Average: Approx. 4.2 A
Peak: Approx. 7.4 A
Low Peak Current Mode
Average: Approx. 1.1 A
Peak: Approx. 4.4 A
Average: Approx. 2.9 A
Peak: Approx. 4.6 A
(*) Continuous mat printing should be within 10 seconds.
To Next Page
Loading...
