TUP500 Series Product Specifications 13-2
4) Ethernet I/F
DIPSW1 Function ON OFF
DIPSW1-1 Emulation (*1) (See table below)
DIPSW1-2 (See table below)
DIPSW1-3 (Reserved) --- ---
DIPSW1-4 Sensor Adjustment Mode Invalid Valid
DIPSW1-5 (Reserved)
--- ---
DIPSW1-6 BUSY Condition Reception Buffer Full/OFF-LINE Reception Buffer Full
DIPSW1-7 (Reserved) --- ---
DIPSW1-8 NE Sensor Contact State (*3) Non-contact Contact
DIPSW1-9 Low Peak Current Mode Invalid Valid
DIPSW1-10 (Reserved) --- ---
*1) Emulation
DIPSW1-1 DIPSW1-2 Emulation
ON ON STAR Line Mode
OFF ON STAR Page Mode
ON OFF (Reserved)
OFF OFF ESC/POS Mode
*3) NE Sensor Connection
Be aware that operations are not guaranteed if the state set using this bit and the actual NE sensor contact state are
different.
To Next Page
Loading...
