Star Micronics TUP900 Series - External Specifications; External Dimensions; External Drawings; Mass

Rev 0.01
TUP900 Series Specifications Manual
4-1
4. EXTERNAL SPECIFICATIONS
4-1 External Specifications
4-1-1 External Dimensions
TUP992-24/TUP992-24J1: Width: 192 mm × Depth: 249.3 mm × Height: 179 mm
Note 1) These dimensions do not include paper roll or optional parts.
4-1-2 External Drawings
See Fig. 4.1.2 on the separate sheet.
4-1-3 Mass
2.84 ±0.02 kg
Note 1) Mass does not include paper roll or accessories (including optional parts).
4-2 Operation Panel Specifications
4-2-1 Switches
(1) POWER Switch: Turns the power of the main unit ON and OFF.
(2) SW 1: Feeds and discharges paper
Note 1) Be aware that the operation of the main unit may vary according to its conditions.
(3) SW 2: Clears errors
Note 1) Be aware that the operation of the main unit may vary according to its conditions.
4-2-2 LED
(1) LED 1: POWER: Green
(2) LED 2: ERROR: Red
4-3 Interface
No interface is included with this unit.
See section 2-2 for details on the optional interface card to use.
4-4 DIP Switches
Changeable on the top of the main unit (control board)
Notes 1) The direction for accessing the DIP switches may vary according to the layout of the control
board.
2) To access the DIP switches, it is necessary to remove the board chassis unit.