16
2. Mute Button
Silence the audio alarm.
3. LED Display
LEDs display visual alerts, signal strength, and operation mode.
Power-On Indicator (green) under POWER lights to indicate power is being
supplied to the detector and the detector is turned on.
X/Ku-band Signal Indicator (yellow) under X/Ku lights and blinks to indicate
the presence of an X/Ku-band radar signal. The blink rate increases as the radar
source gets closer. A distinct audio alert is also heard.
K/Ka-Band Signal Indicator (red) under K/Ka lights and blinks to indicate the
presence of a K/Ka-band radar signal. The blink rate increases as the radar source
gets closer. A distinct audio alert is also heard.
Laser Signal Indicator (red) under L lights and blinks to indicate the presence of
a laser signal. A distinct audio alert is also heard.
City Mode Indicator (yellow) LED under C lights to indicate when you selected
City Mode by pressing the CITY button.
4. City Button
Press the City button to help reduce false alarms while driving in the city. While
driving on the highways or rural, press the City button again to turn off the City
Mode for long-range detection.
5. Speaker
Audio alert frequency increased when the radar source gets closer.
6. DC12V Power Input
Connect the DC Power cord here
7. Reeceiver antenna and laser detection lens
Receiving incoming laser signals.
ADDITIONAL CONTROLS in STAR 2031 and STAR 2036
Dark Button
Models STAR 2031 and STAR 2036 have this function. You can adjust the
brightness of the LED display. It’s rather convenient at night (when the display
brightness might be dimmed in order to prevent eyes weariness) as well as in
daytime (when it’s necessary to increase the brightness).
Signal detection lens which works around the whole perimeter (360°)
STAR 2031 and 2036 detectors have laser detection lens with detection angle of
360°. It allows the total control of the situation on the road and gives you more
confidence while driving your car.
To Next Page
Loading...
Need help?
General
