Star SM-L200 SERIES - Printer Features and Controls; Control Panel Overview

15
3. Printer Features
3.1 Control Panel
3.1.1 Button
1) MODE Button:
①Pressing and holding the MODE button for 2 seconds or more will turn the power on or off.
②Pressing and holding MODE & FEED buttons for 5 seconds will put the printer into Memory Switch
Setting mode. The MODE button can now be used to change Printer MODE status visible on the OLED
screen for fast configuration .
(Refer to 3.3 Memory Switch Settings for details about mode conversion)
2) FEED Button :
①When the printer is on, paper can be fed manually by pressing and holding the FEED button for more
than one second.
②In Memory Switch Setting mode,the FEED button can be used to move cursor(“_”) and confirm the
new setting.
OLED