Star SM-L200 SERIES - Page 31

22
[Standby Time]
Press the MODE button once to switch the menu item--Standby Time.
→Press the FEED button once to get into the menu.
Display: Standby Time:
[0010-9999(Sec)]
0060
→Press the FEED button twice to move cursor(“-”), then press the MODE button twice to input the number: 8,
finally press and hold FEED button to confirm the new setting and return to the previous menu.
(The standby time has set to 80 seconds)
0060(Sec) →0080(Sec)
When set the parameter to 0000, the standby time becomes invalid.
If set the parameter to 001~ 009, a buzzer beeps, so do not set it.
[Auto Off Time]
Press the MODE button twice to switch the menu item--Auto Off Time.
→Press the FEED button once to get into the menu.
Display: Auto Off Time:
[0001-9999(Min)]
0000
→Press the MODE button once to input the number on : 1, then press and hold FEED button to confirm the
new setting and return to previous menu.
(The auto off time has set to 1000 minutes)
0000(Min) →1000(Min)
When set the parameter to 0000, the auto off time becomes invalid.
[Smart Power]
Press the MODE button 3 times to switch the menu item--Smart Power.
→Press the FEED button once to get into the menu.
Display: Smart Power
0-Disable
1-Enable 0
→Press the MODE button once to input the number on : 1, then press and hold FEED button to confirm the
new setting and return to previous menu.