- 27 -
Printer Mode Setting
Display
1 Communication Port
v
1)
RS-232C UART Mode
Bluetooth(Mac) Bluetooth-Mac
Bluetooth(Auto) * Bluetooth-Auto
2 Baud Rate
9600 bps 9600 BPS
19200 bps 19200 BPS
38400 bps 38400 BPS
57600 bps * 57600 BPS
115200 bps 115200 BPS
3 Data Bit
7 Data bit 7 DATA BIT
8 Data bit * 8 DATA BIT
4 Parity Bit
No Parity * NO PARITY
Odd Parity ODD PARITY
Even Parity EVEN PARITY
5 Stop Bit
1 Stop bit * 1 STOP BIT
2 Stop bit 2 STOP BIT
6 Print Density
Density Low DENSITY LOW
Density Medium * DENSITY MEDIUM
Density High DENSITY HIGH
7 Print Quality
Low (80mm/s) * LOW QUALITY
High (50mm/s) HIGH QUALITY
8 Black Mark Sensor
No use * MARK NO USE
Use MARK USE
9 Black Mark Sensor Sensitivity
Low * SENSOR LOW
Medium 1 SENSOR MEDIUM1
Medium 2 SENSOR MEDIUM2
High SENSOR HIGH
10 Power Down
No use * PWDN NO USE
1 Minute Sleep PWDN 1 mim Slp
v
2)
2 Minute Sleep PWDN 2 mim Slp
v
2)
3 Minute Sleep PWDN 3 mim Slp
v
2)
4 Minute Sleep PWDN 4 mim SlP
v
2)
5 Minute Sleep PWDN 5 mim Slp
v
2)
1 Minute Power O PWDN 1 mim Off
2 Minute Power O PWDN 2 mim Off
3 Minute Power O PWDN 3 mim Off
4 Minute Power O PWDN 4 mim Off
5 Minute Power O PWDN 5 mim Off
11 Auto Connection
ON * AUTO CONN ON
OFF AUTO CONN OFF
*: Defalt
Refer to the next page for
v
1 and
v
2.
[Setting Table]
Note :
To change the memory switch setting of the table below, use the buttons on the printer
or the StarPRNT Intelligence application that can be downloaded from our web site.
To Next Page
Loading...
