Need help?Do you have a question about the Starbridge Networks LYNX L-510 and is the answer not in the manual?
General| Model | LYNX L-510 |
|---|---|
| Category | Wireless Access Point |
| Frequency Band | 2.4 GHz |
| Interface | 10Base-T Ethernet |
| Antenna | Internal |
Details ADSL/ATM support, encapsulation, network, management, security, and WLAN features of the router.
Presents a system configuration diagram and an overview of the Lynx L-510 connection setup.
Describes the physical ports and buttons on the Lynx L-510, including reset and factory default options.
Explains the function of each front panel LED indicator on the Lynx L-510 for status monitoring.
Guides on selecting a location and connecting the AC power adapter for the initial setup of the Lynx L-510.
Guides users on how to access and log into the Lynx L-510's web interface using a browser and credentials.
Covers essential basic configuration settings and navigation within the router's web interface.
Explains how to configure the Local Area Network (LAN) and DHCP server for automatic IP address assignment.
Describes performing diagnostic tests to verify the router's connectivity to the WAN network.
Details using the Ping Test to check network connectivity and confirm TCP/IP protocol functionality.
Introduces advanced settings for users requiring more detailed control over network functionality.
Covers the configuration of the Wide Area Network (WAN) connection, specific to the Internet Service Provider (ISP).
Guides through the PPPoE setup process, including necessary connection details like username and password.
Explains how to configure port forwarding to enable local services and online gaming access.
Provides instructions on changing the system username and password for enhanced security.
Details the process for upgrading the router's firmware to the latest available version.
Explains how to reset the Lynx L-510 to its original factory default settings.
Covers the setup and configuration of the wireless network, including SSID and security.
Guides on basic wireless setup, including SSID, channel selection, and enabling the access point.
Details wireless security options like WEP, WPA, and 802.1x to protect the network from unauthorized access.
Introduces security features such as IP filters, LAN isolation, and URL filters for network protection.
Describes configuring IP filters to control router access based on specific IP addresses.
Explains how to use LAN isolation to block traffic between different LAN groups for improved security.
Covers how to view connection status, system logs, network statistics, and modem status.
Displays detailed information about the Internet connection, including protocol, IP address, and connection state.
Allows users to view logged system information for diagnostic purposes and potential remote logging.
Provides troubleshooting steps for common issues when the Lynx L-510 is not functioning correctly.
Offers solutions for connectivity problems, helping users resolve issues accessing the Lynx L-510.
Explains troubleshooting steps for a blinking DSL Link LED, indicating a problem establishing a valid DSL connection.
Provides guidance on diagnosing why the DSL Link LED is off, suggesting checks for DSL service or connection issues.
To Next Page