SF-HC25C3 Height Controller
4
2. Overview
2.1 Technical features
SF-HC25C3 plasma cutting torch height controller is after many years of
practice and several generations of related products into play.
This product adopts the 32-bit arm as the core, two groups of three digital tube
display, adopts digital control mode. Do not contain linear adjustment device
internal, greatly improving the stability.
Velocity parameters can be modified, according to the lifting mechanism with
power supply and any modification.
Circuit adopts the technology of the patch. There is not internal adjustment
device, full digital control technology to ensure that the product has high
reliability.
Operation simple, two groups of digital tube display setting arc voltage and the
arc pressure respectively, concise and straightforward. Setting parameters
operating in total of three knobs.
Interface simply and control convenient, it suitable for all plasma cutting
numerical control system, can also be used alone.
It adopts the proximity switch initial alignment method.
PWM output, speed adjustable of level 255, control of motor speed precise,
several current setting, short circuit protection.
Cutting with the function of collision. When cut lips touch the steel plate, the
controller can quickly cut raise a certain distance, effective protection of nozzle.
All input and output adopt photoelectric isolation, plasma voltage feedback using
linear photoelectric isolated, independent power supply, can very good
compatibility with the partial pressure of various brands of imported plasma
power supply.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
To Next Page
Loading...
Need help?
General
