8
FIG. 1 HOW TO OPEN THE LID
Rotate the lid counterclockwise and lift upward.
FIG. 2 HOW TO REMOVE/REPLACE THE COOKING POT INSIDE THE BASE
Lift the inner cooking pot from the outer pot to wash or fill will food. Insert the cooking
pot back inside the appliance and rotate left and right to make sure it is in contact with
the heating plate. Always ensure the outside of the cooking pot is dry before replacing
inside the appliance.
FIG. 3 HOW TO REMOVE/INSTALL THE PRESSURE RELEASE VALVE
To remove, lift the valve upward. Insert the pressure release valve back into the
outlet. It is normal that the valve fits loose, it is required for pressure and temperature
regulation.
Always point the valve to ‘’sealing’’ position when operating and to ‘’release’’ position
to manually release the pressure. Pressure will not build inside the appliance if pressure
valve is not sealed properly.
Sealing position Component Release position
To Next Page
Loading...
