Need help?Do you have a question about the Starkpower Jumpbox V8 PRO 600 SP-12V600-JB1 and is the answer not in the manual?
General| Peak Jump Start Current | 600A |
|---|---|
| Battery Type | Lithium-Ion |
| Input Voltage | 12V |
| USB Output | 5V/2.1A |
| LED Flashlight | Yes |
| Battery Capacity | 6000mAh |
| Operating Temperature | -20°C to 60°C |
| Warranty | 1 Year |
| Protection Features | Overcharge, Over-discharge, Short-circuit |
| Cycle Life | Up to 1000 cycles |
Covers duration, scope, and exclusions of the product warranty.
Lists critical safety rules for product use, charging, and handling.
Informs about chemical warnings related to California Proposition 65.
Outlines engine compatibility and device charging capacity.
Instructions for recharging the jump starter unit and charge indicators.
Guides on operating the LED flashlight and charging various electronic devices, including laptops.
Step-by-step guide on how to plug in and connect jumper cables.
Instructions for starting the vehicle engine using the jump starter.
Important notes and troubleshooting for jumper cable connections and polarity.
Explains the meaning of LED lights and audible beeps for connection status and protection modes.
Warning against exceeding the continuous engine cranking time limit.
Steps for preparing the vehicle battery and connecting the jump starter cables correctly.
Procedure for starting the engine and safely disconnecting the cables after use.
To Next Page