STARLINGER LOOM-CONTROL V Series

Need help?

Do you have a question about the STARLINGER LOOM-CONTROL V Series and is the answer not in the manual?

Summary

Safety and Warning Instructions

WARNING

Device produces dangerous electrical tension and controls rotating mechanical parts. Death, grievous bodily harm or important damage can result if instructions are not observed.

DANGER

Only qualified personnel should work on this device. Electrical connection, operation and troubleshooting must be done by specialists.

CAUTION

Children and public must not have access. Use device only for intended purpose. Unauthorized modifications can cause fire, shocks and injury.

Functional Description

Description of Symbols

Menu Handling and Menu Selection

Setting the Language and Measuring Unit

Setting the Shift Change

Resetting the Shift Indication

Reading the Shift Data

Setting the Weft Density

Setting of the Start Correction

Setting of the Start Compression

Setting of the Stop Compression

Setting of the Weft Break Correction

Setting the Weft Break Compression

Manual Haul-off Control

Setting the Roll Change

Setting the Periodical Weft Cramming

Setting the Lubricating Interval and Lubricating Time

Indication of Order Change

Reading of the Machine Statistics

Reading the Machine Parameters

Changing the Machine Parameters

Customer Password

Fabric Width

Special Parameter Setting for Customer

Default Settings

Test Menu

Menu Survey

Fault Description

Min. and Max. Settings of Individual Parameters

Software - Update

Contrast Setting

Assignment of Connections

Glossary