STARLINK Gen 3 Router Kit - Page 2

3. Unplug your Gen 2 Router from the High Performance Power Supply, set aside.
1. Start by making sure your Starlink is set up and connected to the internet prior to setting up your Gen 3 Router.
Connect to your existing Starlink WiFi network from your device.
2. Unbox your Gen 3 Router Kit.
Setup
support.starlink.com
GEN 3 ROUTER SETUP GUIDE (HIGH PERFORMANCE KIT)
4. Plug the Gen 3 Router into a power outlet using the power cable and power supply.
Gen 3 Router
HP Cable
Gen 3 Router
Power Cable
Power SupplyStarlink Plug RJ45 CoverGen 3 Router
1.5 m
(4.92 ft)
1.5 m
(4.92 ft)