Instruction manual
10
3. Slide the extension pole into the ceiling mount and pole, until the extension pole
is at the desired height.
4. Line up the holes on the extension pole with the holes on the ceiling mount and
pole.
5. Insert the two bolts through the holes in the ceiling mount and pole and the
extension pole.
6. Attach the two nuts to the bolts, and use the wrench and the hex key to tighten the
nuts in place. (gure 4)
gure 4
Extension pole
Wrench
Hex key
Bolts
Nuts
Ceiling mount and pole
To Next Page
Loading...