supports the use of various drive adapters. The below list of StarTech.com adapters have been specifically tested, to
ensure compatibility with this drive duplicator:
SATA to 2.5in or 3.5in IDE Drive Adapter - SAT2IDEADP
2.5in SATA to Mini SATA SSD Adapter - SAT2MSAT25
M.2 SSD to 2.5in SATA Adapter - SAT32M225
The SDOCK2U313R is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Certifications, Reports and Compatibility
Applications
• Duplicate a 2.5 in. or 3.5 in. SSD/HDD to create an exact replica of a source drive onto a different drive
• Create identical backups for system builds that require the same drive image
• Quickly access or swap bare hard drives and solid-state drives for easy data backup/recovery
Features
• Duplicate hard drives quickly, without a host computer, at fast speeds of up to 28GB per minute for SSDs
• Works with both USB-C and USB-A enabled devices, with two cables included
• Compatible with Thunderbolt 3 USB-C port
• Transfer files at high speed between a docked hard drive and a host computer
• Supports 3.5in and 2.5in SATA SSDs/HDDs
• USB 3.1 (10Gbps) with UASP support for high speed data transfers and backup
• Provides TRIM support
• Supports SATA I/II/III (up to 6Gbps)
• Dual-bay, top slot-loading design (toaster-style) with drive doors and HDD ejection button
• Tool-less and tray-less design
• Compatible with SAT2IDEADP for additional IDE drive support
• Multi-function LED indicators
• Backward compatible
To Next Page
Loading...
