StarTech.com SDOCK2U313R Quick Start Guide

Host Connectors
USB 3.1 USB Type-B (9 pin, Gen 2, 10 Gbps)
Software
OS Compatibility
OS independent; No software or drivers required
Special Notes /
Requirements
Note
Windows 7 and earlier Windows versions do not support TRIM
with USB to SATA devices.
Indicators
LED Indicators
Power
Mode
HDD Status
Clone
Power
Power Source
AC Adapter Included
Input Voltage
100 - 240 AC
Input Current
1.5A
Output Voltage
12V DC
Output Current
3000 mA
Center Tip Polarity
Positive
Plug Type
M
Power Consumption (In
Watts)
36
Environmental
Operating Temperature
5C - 35C (41C to 95C)
Storage Temperature
-20C - 50C (-4C to 122C)
Humidity
20%RH ~ 80%RH
Physical
Characteristics
Color
Black

StarTech.com SDOCK2U313R Specifications

General

Chipset	ASMedia - ASM1352R
Interface	USB 3.1
Product type	HDD duplicator
Product color	Black
Transfer rate	10000 MB/s
LED indicators	HDD, Power, Status
Number of fans	0 fan(s)
Port multiplier	No
Housing material	Plastic
USB connector type	USB Type-B
Duplicator operating modes	Copy
Sustainability certificates	RoHS
Number of simultaneous copies	2 copies
Supported HDD sizes	2.5, 3.5 \
Supported HDD interfaces	Serial ATA, Serial ATA II, Serial ATA III
Input current	1.5 A
Output current	3 A
Output voltage	12 V
Power plug type	Type M
AC input voltage	100-240 V
Included power plug types	AU, EU, NA, UK
Power consumption (typical)	36 W
Package depth	166 mm
Package width	300 mm
Package height	88 mm
Package weight	992 g
Cables included	USB
AC adapter included	Yes
Storage temperature (T-T)	-20 - 50 °C
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	CE, FCC, UL, REACH
Master (outer) case width	464 mm
Master (outer) case height	204 mm
Master (outer) case length	617 mm
Quantity per master (outer) case	10 pc(s)

Weight and Dimensions

Weight	508 g
Dimensions (WxDxH)	132 x 142 x 70 mm