Need help?Do you have a question about the STARVILLE MH-100 Beam 36x3 LED and is the answer not in the manual?
General| Model | STARVILLE MH-100 Beam 36x3 LED |
|---|---|
| Category | Lighting Equipment |
| LED Color | RGB |
| Wattage | 108W |
| Control Protocol | DMX512 |
| Pan | 540° |
| Tilt | 270° |
| Power Consumption | 120W |
| Power Supply | AC 100-240V, 50/60Hz |
| Type | Moving Head |
| LEDs | 36 x 3W LEDs |
Specifies the authorized purpose of the device and warns against misuse.
Details the key capabilities and specifications of the moving head unit.
Instructions for unpacking, checking for damage, and mounting the device.
Guidance on establishing all connections while the unit is switched off.
Details on connecting the device for DMX control, including daisy-chaining.
Instructions for configuring devices in master/slave mode for synchronized shows.
Identifies the spotlight head, main connections, and rotatable mounting.
Details the display, buttons (MENU, UP, DOWN, ENTER, Power), and status LEDs.
Details the POWER IN/OUT sockets, DMX IN/OUT ports, and the fuse holder.
Instructions on powering on the device and its initial startup sequence.
Guidance on activating, navigating, and closing the main menu for device settings.
Procedure for setting the DMX starting address for device control.
Selecting DMX modes and configuring Master/Slave operation.
Configuring automatic, sound-controlled shows and movement inversion.
Adjusting dimmer speed, tilt inversion, and viewing operating hours.
Checking temperature, performing selftests, and factory reset.
Detailed functions for 9-channel and 14-channel DMX modes.
Guidance on using correct DMX cables and avoiding audio device connections.
Lists common problems and their remedies, like no unit response or no DMX signal.
Instructions for cleaning the optical lenses using a soft cloth and lens cleaner.
Procedure for cleaning fan grids with a damp cloth, avoiding solvents.
Details number of DMX channels, illuminant, angles, power, dimensions, and weight.
Explains DMX connections and provides the pin assignment for XLR plugs.
Guidance on recycling transport and protective packaging materials.
Instructions for disposing of the old device according to WEEE directive and local regulations.
To Next Page