MaIntenance
Warranty
MAINTAINING YOUR STEADYRACK
To ensure your Steadyrack bike rack operates perfectly we
recommend you perform the following basic maintenance and checks:
Check and adjust tension on the nuts on Central Pivot Bar
The nuts that attach the central pivot bar to the top and bottom
mounting brackets are pre-tensioned in the factory to a torque setting
of 5Nm. This is to ensure there is enough resistance when you push
your bike into the rack to stop the arms swinging out of the way.
Remove the two clip-in end caps which cover the mounting brackets
using a 13mm socket wrench or a suitable spanner. Adjust the nuts
connecting the central spine to the top and bottom mounting brackets
to the desired tension. Be sure to not overtighten or the rack won’t
pivot. Replace your end caps and you are good to go.
Check the nuts attaching the top and bottom arms
to the Central Pivot Bar
The 2 arms are connected to the central pivot bar by bolts with
dome nuts and black tips either side. These can work loose over time.
Check them periodically and tighten.
Check your mounting bolts from time to time to make sure they
have not worked loose and tighten if necessary.
Cleaning
Ensure the rack remains free from dirt and debris and
clean by dusting or using a dry cloth from time to time.
Materials
Mild Steel Zinc Coated
UPVC Plastics
WARRANTY
Steadyrack warrants that the Steadyrack Bike Rack is free from defects
in workmanship and materials for a period of 12 months from the date
of retail purchase. Any claim for breach of this warranty must be made
on the following conditions:
a. the defects have arisen solely from faulty materials or workmanship;
b. the Steadyrack Bike Rack must not have been changed nor
tampered with in any way;
c. failure of the Steadyrack Bike Rack must not be due to misuse,
improper installation or other maltreatment, interference or
abuse including, but not limited to, use in a manner contrary
to our specications or instructions;
d. the Steadyrack Bike Rack must be returned to the supplier;
e. Steadyrack will not be responsible for damage or loss caused
during or as a result of shipping;
f. Steadyrack warranty is voided if racks are used to transport bicycles.
Subject to the above conditions of warranty, if the Steadyrack
Bike Rack fails for any reason within the warranty period and the
Steadyrack Bike Rack is returned to us, Steadyrack will at its
discretion repair or replace, or cause to be repaired or replaced,
the Steadyrack free of charge at its expense.
Except as expressly provided herein all express and implied
warranties, guarantees and conditions under statute or general law
as to merchantability, description, quality, suitability or tness of the
Steadyrack Bike Rack for any purpose or as to design, assembly,
installation, materials or workmanship or otherwise are, to the extent
permitted by law, hereby expressly excluded and Steadyrack shall
not be liable for physical or nancial injury loss or damage or for
consequential loss or damage of any kind arising out of the supply,
assembly, installation or use of the Steadyrack Bike Rack or arising in
any other way whatsoever.
To Previous Page
Loading...