STEAMEMO POE Series

To Next Page

To Previous Page

Product A lication

CAM

POE IPC

POE

Wireless AP

POE splitter

SWITCH

intern et

NVR

The display is representative of the product, the actual object may be different, but It',e function is the same

FAQ

A. Which cameras can connect to this POE switch?

•POE camera with IEEE 8023AF/AT

•If it is not a POE camera, you can add a standard POE splitter to connect the switch to the camera.

B.The distance is only 50 meters, the camera is normal during the day, there is no image at night, and the

monitor is black?

•Th is is a case where the typical camera is underpowered. Please make sure that the network cable you

are using is more than five international standards or connected to the Internet.

•It is recommended to use a mu Itimeter to measure the resistance of the network cable. The line of 10

meters and 0.9 ohms can run 100 meters, the line of IC meters and IS ohms can run SO meters, and the

line of 10 meters and 3 ohms can only run more than 10 meters.

C. I used a super five network cable, butonly after receiving more than 30 meters, there is no signal?

•Please make sure that the crystal head is crimped into the positiom It is recommended to use a line

tester to test whether the network cable can commu nicate at both ends.

•Check the crystal head pressure wiring sequence, please use T568B connection method to cri mp the

crystal head.

D. Can it support 4 -core network cable power supply, will it affect camera data transmission?

•Our company's POEswitch supports 1236 li ne-sequence power supply, so it is very compatible with 4-

core power supply.

•The network interface of the camera isa 100M network port. The transmission of the 100M network is

only 1236 quad core, and the other four cores do not play or con nect, so it will not affect the camera

transmission.

E. When do I need to enable the Extend function?

•Extend is a su per-long transmission function, generally more than ICO meters distance requirement.

•The camera signal is disturbed or insufficient in inte nsity, causing instability such as image transmission

and intermittent.

STEAMEMO POE Series - Page 3