Stearns 429-07 User Manual

1. SLIP ARMS INTO VEST.
2. SNAP BOTH BUCKLES.
3. CLOSE FRONT PADS TOGETHER.
4. ADJUST BUCKLES TO SNUG FIT.
5. PULL BOTTOM DRAW STRAPS
SNUG AND TIE TO SECURE.
IMPORTANT MESSAGE - PLEASE READ NOW
WARNING: THIS PFD CAN ONLY BE PUT ON ONE WAY
Stearns
®
Inc. • P.O. Box 1498, St. Cloud, MN 56302 USA • 320.252.1642 • e-mail: stearns@stearnsnet.com • www.stearnsinc.com
MODEL #429-07 CATALOG #I120
Personal Flotation Device
USCG APPROVED TYPE I
OFFSHORE PFD DONNING INSTRUCTIONS
KL0407

Stearns 429-07 Specifications

General

Brand	Stearns
Model	429-07
Category	Marine Safety Device
Language	English

Summary

USCG Approved Type I Offshore PFD Donning Instructions

Important Safety Information

Read important message and warning regarding correct PFD usage and installation.

Step 1: Slip Arms Into Vest

Insert arms into the designated openings of the PFD.

Step 2: Snap Both Buckles

Secure the PFD by fastening both buckles.

Step 3: Close Front Pads Together

Bring the front protective pads of the PFD together.

Step 4: Adjust Buckles to Snug Fit

Tighten the buckles to ensure a snug and secure fit.

Step 5: Secure Bottom Draw Straps

Pull bottom draw straps snug and tie them to secure the PFD.