12
Usage
∙ Make sure that the device is not plugged in before inserting the blades!
∙ Place the two blades on top of each other and slide the metal pin of one into the
hole of the other blade
∙ Take the two blades with the blade guard and insert them into the slots on the mo-
tor part until they snap into place.
∙ Now remove the blade guard and plug in the device.
∙ Carefully cut the food without much pressure from top to bottom.
∙ Pay attention not to cut into bones or metal, neither operate the device on a metal
surface. Otherwise the blades will blunt.
∙ Never press the ON / Off button and
the release button simultaneously.
∙ Long-term usage: in order not to damage the motor, the operating time
should not exceed 15 minutes. Then, let the motor cool down for approx.
5 minutes.
To Next Page
Loading...