EasyManua.ls Logo

Steba KB11 - First Use Preparation and Warnings; Appliance Placement and Connection

Steba KB11
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Keep the power cord away from hot parts.
Never leave the appliance unattended when operating.
Do not place anything on the top of the appliance or cover the
ventilation holes.
Never store the appliance outdoors or in a damp area.
Never immerse the appliance in water.
Do not operate the appliance if it is damaged, e.g. it fell down,
or it is damaged in any other way.
Repairs at the appliance, e,g, exchange of a damaged power
cord, must only be done by authorized service persons, to avoid
any dangers.
The appliance becomes hot. Do not move the appliance until it
cooled down
Always remove the wire grill or handle with an oven glove from
the oven to avoid the danger of burns.
Befor the first use: Heat up the appliance for about 10
min. before baking or grilling to eliminate any produc-
tion-oil. The appliance can smoke a little bit in the beginning.
Attention! Housing and glass get hot. Danger of
burns! Do not place the appliance on a sensitive sur-
face (e.g. painted furniture) and keep a distance of at
least 70cm to burnable materials. The backside of the appliance
must be positioned direct at the kitchen wall.
Always connect the device to a safety socket
Route connecting cable in such a way as to avoid unintentional
contact or pulling during operation.
Unplug device from socket before moving its location.
Disconnect mains plug after use and before cleaning.
The cooling fan runs for 5 minutes after switching off the
device.

Related product manuals