10
Cleaning
∙ Attention!
Pull the plug before cleaning.
∙ Never immerse the unit into water.
∙ Clean the housing with a damp cloth.
∙ Do not use aggressive or abrasive cleaning agents.
∙ The metal dust should be removed from the grinding chamber
every 6 month.
∙ Remove the grinding chamber from the motor part with a ro-
tary move.
∙ Remove the blade lead 1 & 2 and then remove the metal dust.
∙ Then, reinsert the blade lead 1 & 2 and reconnect the grinding
chamber with the motor part.
To Next Page
Loading...
