Steba MG 400 - Page 12

12
Usage
∙ Do not connect the device during assembly!
∙ The device is not suitable for processing hard or frozen foods.
∙ Put the blade set on the blade
holder and fill in the food.
∙ Place the lid and the motor part on top of it.
∙ Connect the device and press the following buttons:
o I for medium speed
o II for high speed
∙ Disconnect the device before opening it.
∙ The freshness lid (9) can be placed on the glass jar for storage in the refrigerator.
To do this, take the blades out of the device beforehand.
Whisk for whipped cream or
beaten egg white
∙ The device is not suitable for
processing hard or frozen foods.
∙ Put the blade set on the blade holder and fill in the food.
∙ Place the lid and the motor part on top of it. Choose the desired speed level.
∙ Disconnect the device before opening it.