8
∙ The appliance must not be operated using a timer or a separate
remote system!
∙ After using the appliance or if the appliance malfunctions, al-
ways pull out the plug.
∙ Never pull at the cord set. Do not chafe it over edges or squeeze
it.
∙ Keep the power supply cord away from hot parts.
∙ Never leave the appliance unattended when operating.
∙ Do not leave the appliance outdoors or in a damp area.
∙ Never immerse the appliance in water.
∙ Do not operate the appliance if it is damaged (for example if it
felt down).
∙ The manufacturer is not liable for damage occurred by using
the appliance in another way than described or if a mistake in
operating has been made.
∙ To prevent injury, repairs such as replacing a damaged cord,
should only be carried out by customer service.
∙ Caution!
The foil sealing strip becomes hot. Do not transport
until the equipment has cooled down.
∙ Disconnect plug from power supply when device is not in use.
∙ If an extension cable is being used, please ensure that children
do not pull on it and that it is not a potential tripping hazard.
∙ The device is not intended for continuous use, always allow to
cool between sealing operations.
Workspace:
Important: Never put the device on or next to a hot surface (e.g. the rings of a
stove).
Always put the device on a surface that is level, stable, temperature-resistant and dry.
Keep it away from the edge of work surfaces so that it cannot fall off during use.
Before initial use:
∙ Wipe off the device with a damp towel.
∙ The sealing rings and the bag sealing bar must be clean and level, otherwise it will
not be possible to generate a vacuum.
To Next Page
Loading...