Need help?Do you have a question about the Steel mate 838G and is the answer not in the manual?
General| LCD Display | Yes |
|---|---|
| Remote Start | Yes |
| Turbo Timer Mode | Yes |
| Pager Alert | Yes |
| Voltage | 12V |
| Immobilizer | Yes |
| Central Locking | Yes |
| Anti-hijack | Yes |
| Panic Alarm | Yes |
| Valet Mode | Yes |
| Shock Sensor | Yes |
Diagnosing and resolving continuous siren chirping after installation or during operation.
Addressing false alarms caused by passing heavy vehicles by adjusting sensor sensitivity.
Checking siren, ECU connection, and sensor sensitivity when the alarm does not activate.
Troubleshooting transmitter issues including battery, frequency, or damage.
Resolving siren chirping 10 seconds after arming or disarming, checking sensor and door status.
Diagnosing and fixing issues with the central door lock system, including wiring and fuses.
Explains how to arm in alarm or mute mode, and disarm the system using the transmitter buttons.
Details using the transmitter to release the trunk and activate the car locating feature.
Lists key technical parameters of the car alarm system, including voltage, current, and frequency.
Covers emergency override procedures and the use of Valet Mode for service or washing.
Details how the shock and tilt sensors trigger alarms and immobilize the engine.
Explains LED indicators for system status, door/trunk status, and system warnings.
Describes automatic door locking and how the system preserves its status after power interruption.
Details active arming, passive arming, auto re-arm, and disarming procedures.
Covers anti-hijacking, not-armed warnings, and shock sensor bypass functionalities.
To Next Page
