Do you have a question about the Steelcraft BABY CAPSULE 60/A/2013/1 Series and is the answer not in the manual?
Harness | 5-point harness |
---|---|
Model | 60/A/2013/1 Series |
Safety Standards | AS/NZS 1754 |
Sun Protection | Integrated sun canopy |
Compatibility | Compatible with Steelcraft strollers |
Details rearward-facing use until shoulder height marker and associated safety risks.
Covers essential safety rules like not leaving children unattended and avoiding modifications.
Details seatbelt types, second-hand use, and anchorage points.
Explains how shoulder height markers indicate when to change restraints.
Describes suitable follow-on seats for growing children.
Lists and illustrates key parts like harness, buckle, and pads.
Details components like the stabilising bar and angle adjustment foot.
Shows storage pocket, car's seat belt, carry handle, canopy, and tether components.
Discusses rearward-facing use, seat space, shading, and car ventilation.
Highlights tether strap use, seat angle, and airbag avoidance.
Step-by-step guide to detach the capsule from its base.
Explains how to set the carry handle for different modes.
Instructions for attaching and detaching the canopy.
Details base placement, level indicator, and recline angle adjustment.
Guides through feeding and engaging the seatbelt for installation.
Explains how to attach the top tether strap to the car's anchor point.
Covers loosening, positioning, and securing the harness straps for the baby.
Instructions on positioning the baby correctly within the capsule.
Details fitting harness tongues, adjusting straps, and ensuring a snug fit.
How to attach the capsule to its base and secure it.
Instructions for feeding, adjusting, and securing the top tether.
Steps to release the baby from the harness and capsule.
Instructions for fitting the capsule to an aircraft seat using the lap belt.
Guidance on refitting the cover after aircraft installation.
Lists essential checks for webbing, moulding, buckle, and adjuster.
Details how to clean the seat hardware, straps, and buckle.
Specific steps to clean a sluggish harness buckle.
Guidance on cleaning, maintaining, and replacing the cover.
Describes boot covers and removable buckle pads.
Mentions shoulder pads, extra bases, and other recommended accessories.
Provides detailed guidance on locating and fitting the top tether anchor point.
Instructions for installing anchor points in vehicles that do not have them.
Explains how to use a 3-bar slide for a more secure seatbelt fit.
Instructions for connecting the baby capsule to a compatible stroller.
Steps to detach the capsule from the stroller.
Covers general safety advice for infant transport.
Advice on dressing the baby appropriately for car travel.
Advises on what to do if the restraint is involved in a severe crash.
Provides company information, contact numbers, and warranty terms.