EasyManua.ls Logo

SteelSeries World of Warcraft Mouse - Connecting and Installing; Connecting Your Mouse; Technical Specifications; Installing the Software

SteelSeries World of Warcraft Mouse
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CONNECTING
YOUR
MOUSE
Connect the USB cord to a USB port.
NOTE:
The World of Warcraft® MMO Gaming Mouse can work in 250/500/1000Hz polling
rate frequencies. This is configurable through the software and will be explained in the
software section below. Some USB hubs might decrease the mouse polling frequency; if you
experience decreased performance when using your mouse with a USB hub, plug your
mouse directly into the USB port on your computer.
TECHNICAL
SPECIFICATIONS
Interface: USB 1.1 operating at full speed*
Sensor Type: Laser
Real-time Adjustable (via software) Resolution: 800/1200/1600/2000/2400/
3200 DPI (Default: 800 DPI)
Max. Speed: 65ips
Frame Rate: 7200fps
Max. Acceleration: 20g
Min. Lift Distance: 2.5mm
Adjustable Polling Rate (via software): 1000/500/250 Hz at 1/2/4 ms respectively
(Default: 500 Hz / 2 ms response time)
Data Path Format: 16-bit
Sleep Mode: Disabled (the mouse is always on)
Buttons: 15
Cord: Braided, 2m (6.5 feet)
*Denotes operating rate of 12 Mbit/s (1.5 MB/s).
INSTALLING
THE
SOFTWARE
1. Download the software from our website:
http://www.steelseries.com/downloads/
2.Launch the installer and follow the instructions on the screen
3

Related product manuals