Need help?Do you have a question about the Steinbach Waterpower 5000 and is the answer not in the manual?
General| Type | Electric |
|---|---|
| Power | 5 kW |
| Voltage | 230 V |
| Suitable for pools up to | 20 m³ |
| Frequency | 50 Hz |
| Protection Class | IPX5 |
| Cable Length | 1.5 m |
| Weight | 5 kg |
Provides crucial safety guidelines for using heated pools and the heat pump.
Specifies requirements and considerations for the physical placement of the heat pump.
Steps and recommendations for connecting the heat pump to the pool's water circulation system.
Instructions and safety requirements for connecting the heat pump to the electrical power supply.
Detailed guide on how to operate and navigate the heat pump's control panel.
How to initiate the heat pump's heating or cooling cycle after it's on.
Guide to adjusting the desired water temperature for heating or cooling.
Overview of the sensors that monitor and control the heat pump's operation.
Description of the internal devices that protect the heat pump from hazardous conditions.
Explains the function of the sensor that monitors and reacts to high pressure in the system.
Explains the function of the sensor that monitors and reacts to low pressure in the system.
Periodic maintenance tasks requiring a qualified technician.
A guide to identifying and resolving common problems and error messages.
To Next Page