Do you have a question about the Steinberg Systems SBS-LI-18 and is the answer not in the manual?
Capacity | 18 l |
---|---|
Voltage | 230 V |
Weight | 12 kg |
Safety Features | Over-temperature protection |
Material | Steel |
Temperature range | Ambient +5°C to 70°C |
Type | Incubator |
Power Supply | AC |
Display | LED |
Door | Glass |
Ensure the device plug fits the socket and avoid modifying original plugs.
Do not touch earthed items or operate in damp environments to prevent electric shock.
Avoid touching the device with wet hands; prevent the device from getting wet to reduce shock risk.
Use cables only as intended, keep them away from heat/sharp edges, and check for damage.
Use an RCD if the device operates in a damp environment to reduce shock risk.
Do not use a damaged power cord; it must be replaced by a qualified electrician.
Do not immerse the cord, plug, or device in liquids or use on wet surfaces.
The electrical socket must have a grounding wire for safe operation.
Do not operate the device when tired, ill, or under the influence of substances that impair ability.
Device is not for persons with limited mental/sensory functions or lacking experience without supervision.
Use common sense and stay alert; temporary loss of concentration can cause serious injury.
The device is not a toy; children must be supervised to prevent them from playing with it.
Do not use the device if the ON/OFF switch is faulty; it requires repair.
Disconnect power before adjustments, cleaning, or maintenance to prevent accidental activation.
Store the device safely away from children and inexperienced users.
Keep the device in perfect technical condition, checking for damage before each use.
Keep the device out of the reach of children.
Device repair/maintenance must be done by qualified persons using original spare parts.
Do not remove factory-fitted guards or loosen screws to ensure operational integrity.
Observe health and safety principles during transport and handling according to local regulations.