8
Low Battery Indication
When the battery gets low, the TOR Mini’s laser will
step down in power and slowly flash before turning off
completely. Replace the battery when this occurs.
Rail Mounting
IMPORTANT: Unload the firearm and remove the magazine
before mounting the TOR Mini.
The rail mount on the TOR Mini will fit pistols that have a
Picatinny or Weaver style rail forward of the trigger guard.
Follow these steps to mount the TOR Mini to the rail:
1. Using a flathead screwdriver, fully loosen the captive
screws.
2. Pull back the clamp bar.
3. Position the rail bar to fit the weapon’s rail.
4. Once the best rail position is found, ensure the rail bar
pins are inserted in the clamp bar in your preferred
position. There are 6 rail positions to choose from.
5. Tighten down the screws until snug.
To Next Page
Loading...