1. Use the metronome. Press the metronome button—the light turns on.
2. Change the tempo
A. Press the metronome button and the corresponding sound button together
B. Select the tempo - there are 5 kinds of tempo. 0 beat tempo, 2 beat tempo,3 beat tempo,4 beat tempo,5 beat tempo
and 6 beat tempo.
C. When the power is turned on, the tempo is 4 beat tempo
3. Change the speed.
Move the speed/balance adjuster - the speed slows down when it moves left and speeds up when it moves right.
4. Change the volume
Hold down the metronome button, and the light begins to flash, move the speed/balance adjuster to change the volume.
● When power is on, the initial volume is set by the factory
● Before moving the adjuster, the volume is the last volume set.
Press the metronome button------the light turns off, the function stops
5. Stop setting the volume
Press the metronome button, the light turns on from flashing. The speed/balance adjuster is in the state of adjusting the
speed.
6. Stop the metronome function
Press the metronome button again and the light turns off.
7. In order to set the exact speed, you should go directly to input setting.
A. Hold down the metronome button and press the B5 (starting) button, the light flashes quickly.
B. Input the number
Input the speed number with the key from C6-A6
For example: press 1-C#6,3-D#6,4-E6 one by one, then it means the speed is 134
C. Stop the setting
To Next Page
Loading...