● Memory capacity --about 5000 events.
Content of recording includes pedal operation, change of timbre and pauses, etc…
● Memory warning
The record light starts to twinkle when the memory becomes full.
The record light is turned off and the record stops when the recording amount exceeds 5000 events.
● Stop the recording
Press the record button again and the light is turned off.
● Use the metronome
Before the recording, operate the metronome, and it will be recorded.
● Change the Measure
Measure can not be changed during the recording.
● Change the speed
Speed can not be changed during the recording.
2. Playback
A. Start the playback
Press the play button and the recorded song begins to play, the light is turned on
B. Stop the playback
After the song is finished, the playback stops and the light turns off.
C. Stop the playback in the middle of a song
(15) TRANSPOSE
l. Transpose
Hold down the transpose button and press the F2—F3 key, the light turns on after the transpose.
2. Back to ―C‖ or standard key
Press the transpose button, the light turns off and the instrument returns to its original key.
To Next Page
Loading...