Steinway & Sons Model D – Installation Manual, version 2.1
Using a Dolly for Moving the Speakers
Included in the packaging is a dolly cart with four multi-directional wheels. It is placed as a lid above the
amplifier module compartment in the right speaker crate. You can use the dolly for moving the speakers into
and inside of the place of installation. Unlock the Clip-Lok clips following the instructions on page 8 and the
dolly can be taken out of the crate.
Spikes
The speakers are designed to stand on each four spikes or feet. The system accessories box contains three
mounting options.
a. 28 mm high spikes for wooden floors or floors covered with ordinary carpet.
b. 48 mm high spikes for floors covered by thick carpet.
c. Non-penetrating feet mainly for marble, granite or similar floor materials.
To Next Page
Loading...