Stella PRO reflex - Updating Reflex Firmware

G
MEN
U
Wireless - Rotate dial to select
transmitter type (Elinchrom,
Godox, Bluetooth, Wireless OFF)
Set Wireless mode to Bluetooth
to perform firmware updates.
Elinchrom
Godox
Bluetooth
- wireless off
wireless
Section 8
UPDATING REFLEX FIRMWARE
1. Download the StellaPro Imaging Control
Application
2. Set Reflex Wireless Mode to Bluetooth
3. Exit Reflex Menu
4. Scan for devices in App
5. Connect To Device
6. Enter Serial Number
7. Initiate Firmware Update