Adjusting Azimuth: Moving the binocular in
azimuth (left/right) is a simple matter of turning
the mount on its pivot disk. There is no azimuth
lock feature.
Adjusting the Height of the Binocular: A nice
feature of the Paragon-Plus binocular mount is
that when the binocular is pointed at an object,
the height can be adjusted for different viewers
without moving the binocular off its target. To do
this, simply move the binocular so that only the
parallelogram part of the mount is moving. Do
not adjust the tilt angle of the binocular or move
the mount on its pivot disk.
To Next Page
Loading...