All instructions, warranties and other collateral documents are subject to change at the sole discretion of
STEPCRAFT, Inc. For up-to date product literature, visit www.stepcraft-systems.com for customers from Europe
or www.stepcraft.us for customers from US / Canada and click on the service & support tab for this product.
Meaning of special language
The following terms are used throughout the product literature to indicate various levels of potential harm when
operating this product: The purpose of safety symbols is to attract your attention to possible dangers. The safety
symbols, and their explanations, deserve your careful attention and understanding. The safety warnings
themselves do not eliminate any danger. The instructions or warnings they give are not substitutes for proper
accident prevention measures.
Procedures, which if not properly followed, create a possibility of physical property damage
AND a little or no possibility of injury.
Procedures, which if not properly followed, create a probability of physical property damage
AND a possibility of serious injury.
Procedures, which if not properly followed, create a probability of property damage, collateral
damage, serious injury or death OR create a high probability of superficial injury.
Safety alert: Indicates caution or warning. Attention is required in order to avoid serious
personal injury.
Read the ENTIRE instruction manual in order to become familiar with the features of the
product and how to operate them. Failure to operate the product correctly can result in damage
to the product, personal property and cause serious injury, electric shock and/or fire.
This is a sophisticated hobby and semi-professional product for advanced craftsmen with previous experience in
the operation of tools such as electric drills, routers and computerized tools like CNC routers or 3D printers. It
must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate
this product in a safe and responsible manner could result in personal injury or damage to the product or other
property. This product is not intended for use by children without direct adult supervision. Do not attempt
disassembly, use with incompatible components or augment product in any way without the approval of
STEPCRAFT GmbH & Co. KG or STEPCRAFT, Inc. This manual contains instructions for safety, operation and
maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly,
setup or use, in order to operate correctly and avoid damage or serious injury.
Age recommendation: For advanced handcrafters ages 14 and above. This is not a toy.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
Should you encounter any doubts or require any further information, please do not hesitate to contact us
before commissioning of the system and/or the spindle. Our contact details can be found on the front
page of this manual.
The term “spindle” in the warnings refers to your mains-operated (corded) power supply and the spindle itself.
This could be a third-party product or the STEPCRAFT high frequency spindle.
The term “machine” or “system” in the warnings refers to your mains-operated (corded) power supply and the
STEPCRAFT CNC /3D desktop system itself.
General safety precautions and warnings
This tool is controlled by a computer. Within operation it cannot be directly controlled. Missing caution or program
errors can cause unexpected movement.
Always ensure you fully understand the control program on your computer and how it affects the movement of
the tool.
Always operate your tool indoors on a solid horizontal table or workbench.
Always carefully follow the manufacturer directions and warnings for any related equipment (i.e. 3D print
spindles, 3D print heads, drag knifes, etc.).
Always keep the product, related tools, small parts and electrical components out of the reach of children.
Always keep children well out of the vicinity of this product.
Always keep hair secured above your shoulders so it cannot get caught in the linear guides or the rotating
tools.
To Next Page
Loading...
