EasyManua.ls Logo

Steripower 10041 - Page 9

Default Icon
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
INSTALLATION
7.
Medical Pad (consumable no. 12020): For
sucking away residual liquids and absorbing the
steams of disinfectant liquids of any kind.
8. Checking the LED display:
(refer to pg. 01 / item 11)
• flashing green, 2 seconds intervals:
Rechargeable battery is ready for operation!
• red-green simultaneously:
Recharge battery! Only for Steripower with
rechargeable battery (art. 10040)
• flashing red:
Recharge battery immediately! Only for Steri-
power with rechargeable battery (art. 10040)
9. Replacing the rechargeable battery: Please
contact the technical personnel or observe the
instructions when recharging or replacing the
device. Attention: the protective caps of the re-
chargeable battery serve against short-circuit
protection! Only for Steripower with rechargea-
ble battery (art. 10040)
10. Closing the device: Put the front cover onto
the device at an angle of 90° (straight towards
device). Lift above the interlocking at the upper
edge, press at the lower part until latched. Check
the device for functionality.
11. Counter: (optional art. no. 13010)
Using the counter, the number of sprays already
performed as well as the set liquid quantity per
spray interval is indicated on a digital display
in ml. Point the counter towards the (LEDs) and
keep the power button pressed. The digital
display changes automatically between the indi-
cation of ml and the indication of sprays perfor-
med.
INSTALLATION
07 | INSTALLATION
1
2
2
1