Sterling Scale DW800 - Page 18

DW800/820 Operation Manual
SPECIFICATIONS
Page 15
Operational
Internal Counts: 18,777,215
Display Counts: 10,000 recommended (50,000 maximum)
Display Update Rate: 10 times per second
Input Sensitivity: 0.5uV per graduation
Linearity: 0.01% of full scale
Overload Capacity: 105% of full scale
Load Cell Excitation: 10VDC (9,350 ohm load cells or 16,750 ohm load cells)
Calibration
Method: Digital calibration
Range: 0.5 mV/V to 3.0 mV/V
Capacity: 2 to 500,000 lb., kg., or g
Display
Type: 6, 14 segment LCD with 20 annuniciators
Enunciators: SCALE 1, 2, 3, 4 GROSS, NET, TARE k, g, lb., pcs,
SP3, SP2, SP1, LO BAT, M, -, ID,and ->0<-
Backlight: Yellow/Green LED
Serial Interface
Type: RS-232 (bi-directional, full-duplex)
*RS-422 (bi-directional, half-duplex)
*RS-485 (bi-directional, half-duplex)
*20mA Current Loop (transmit only)
Baud Rate: Selectable from 150 to 19,200 bits per second
Parity: Selectable from none, odd, or even
Data Bits: Selectable from 7 or 8 bits
Start Bits 1
Stop Bits 1
Flow Control Hardware flow control available for RS-232 only
Options
* Battery Operation
_____________________________________________________________________________________________________________
Revision 4.3 Copyright ©2004 Sterling Scale Co., Inc. May 2004
Web Site: www.sterlingscale.com E-mail: sales@sterlingscale.com