To Next PageTo Next Page
Need help?Do you have a question about the Sterling 10 and is the answer not in the manual?
Procedure for changing text labels on the user display using keypad buttons and functions.
Information on how the panel indicates a loss of AC power, relying on battery backup.
Details on how the system indicates faults and lists common fault conditions detected by the panel.
Enables testing of activated zones by simulating entry/exit and zone activation.
Instructions for setting the alarm panel, including different set types like A, B, C, or D.
Explains how to set and unset the panel during a mains power failure, with full functionality available.
Details the procedure for setting the alarm panel silently without audible feedback until set.
Allows setting the panel after a countdown, requiring a final button press to arm the system.
Guides on how to set the panel while omitting specific zones, preventing them from triggering an alarm.
Explains the procedure for disarming the alarm system using the correct user code.
Steps to reset the system after an alarm has occurred, requiring the user code.
Describes the duress function, which allows silent alarming by entering a modified code.
Instructions on how to activate the personal attack alarm feature for immediate assistance.
Details on how to manually trigger the fire alarm function for emergency notification.
Guides on enabling or disabling the audible chime feature for entry/exit delays.
Procedure for viewing past system events and alarms, allowing scrolling through the last 100 events.
Allows master users to clear the system event log if the feature was enabled by an installer.
Guides on performing various system tests including display, strobe, bell, and sounder functionality.
Procedure for changing text labels on the user display using keypad buttons and functions.
Information on how the panel indicates a loss of AC power, relying on battery backup.
Details on how the system indicates faults and lists common fault conditions detected by the panel.
Enables testing of activated zones by simulating entry/exit and zone activation.
Instructions for setting the alarm panel, including different set types like A, B, C, or D.
Explains how to set and unset the panel during a mains power failure, with full functionality available.
Details the procedure for setting the alarm panel silently without audible feedback until set.
Allows setting the panel after a countdown, requiring a final button press to arm the system.
Guides on how to set the panel while omitting specific zones, preventing them from triggering an alarm.
Explains the procedure for disarming the alarm system using the correct user code.
Steps to reset the system after an alarm has occurred, requiring the user code.
Describes the duress function, which allows silent alarming by entering a modified code.
Instructions on how to activate the personal attack alarm feature for immediate assistance.
Details on how to manually trigger the fire alarm function for emergency notification.
Guides on enabling or disabling the audible chime feature for entry/exit delays.
Procedure for viewing past system events and alarms, allowing scrolling through the last 100 events.
Allows master users to clear the system event log if the feature was enabled by an installer.
Guides on performing various system tests including display, strobe, bell, and sounder functionality.
General| Type | Keypad |
|---|---|
| Model | Sterling 10 |
| Interface | USB |
| Compatibility | Windows, macOS |
| Material | Plastic |
