Sterling 6500 Series - User Manual

Installation Guide
Hinge Shower Door
Français, page “Français-1”
Español, página ″Español-1”
6500 Series
1034028-2-D

Summary

Tools and Materials

Before You Begin

Determine the Door Configuration

Decide on the door's pivot side (left or right) and check its swing clearance.

Parts Names

Measure and Cut the Bottom Track

Determine Filler Jamb Requirement

Consult the provided chart to determine if a filler jamb is necessary for the installation.

Install the Adjustment Clamps

Install the Wall Jambs and Optional Filler Jamb

Caulk and Install Bottom Track

Assemble the Hinge Jamb

Install the Hinge to the Door Panel

Install the Flat Seal

Install the Strike Side Wall Jamb and Magnet

Install the Door Panel and Magnet

Adjust and Secure the Door

Install the Handle;Towel Bar

Caulk the Shower Door

Sterling 6500 Series Specifications