stertil-KONI ST 1055 User Manual

Mobile Column Lifts
ST 1055
ST 1060
ST 1072
Installation - operation - service
325-58-990A

stertil-KONI ST 1055 Specifications

General

Stroke	1850 mm
Protection Class	IP 54
Lifting Height	1850 mm
Power Supply	230 V, 50 Hz
Power	2.2 kW

Summary

1. General

1.2 Specifications

Technical specifications for ST 1055, ST 1060, and ST 1072 lifting columns.

2. Directions

2.4 Safety Measures

Details safety precautions, behavioral guidelines, and important safety instructions for lift operation.

3. Description of the Lifting System

3.1 Structure of the Column Lift

Explains the main components of a lifting column: column, hydraulic unit, control box, pallet jack mechanism, and safety lock.

4. Installation

4.1 Unpacking and Handling the Lifting Column

5. General Use

5.1 Control

Describes the functions of the primary and secondary column control panels and their buttons.

5.2 Connecting Lifting Columns

Explains how to connect multiple lifting columns into a closed ring circuit for system operation.

5.3 Description of the Mobile Column Lift System

6. Operation

6.1 Preparation

Steps required to prepare the lifting system, including installing adapters and connecting columns.

6.2 Raising and Lowering All Lifting Columns

6.3 Raising and Lowering of Two Lifting Columns (One Vehicle Axle); Paired Operation

6.4 Raising and Lowering a Single Lifting Column

6.5 Emergency Release

Instructions for emergency lowering procedures, to be performed by qualified personnel.

7. Inspection and Maintenance

7.1 General

7.2 Daily (by Operator)

7.3 Monthly (by Operator)

7.4 Annually (by Service Department)

Annual inspection procedures for qualified service personnel, including checks and oil replacement.

7.5 Maintenance Switches

7.6 Removal/Installation of the Lifting Cylinder

7.7 Adjusting the Pallet Jack Mechanism (Only ST 1072)

8. Service

8.1 General

8.2 Trouble-Shooting

Guide to diagnosing and resolving common faults using LED indicators and fault codes.