170
Introduction
Thank you for choosing this product. Upon designing and manufacturing our products, we place
instructions allow to optimize the lifetime
IMPORTANT! IN ORDER TO OBTAIN THE UTMOST SATISFACTION FROM THIS PRODUCT
SETTING IT UP, USING IT, AND MAINTAINING IT, WE RECOMMEND THAT YOU CAREFULLY
THIS USER MANUAL BEFORE USING THE PRODUCT. PLEASE PAY ATTENTION TO BASIC W
RELATING TO SAFETY WITHIN THIS MANUAL, AND KEEP THE MANUAL FOR LATER REFERENCE.
CAREFULLY
1. INTENDED USE OF EVACUATION PUMP DIRTY WATER 1000W
or out containers, for water removal from wells and shafts as well as for draining water from boats
yachts, provided that it is fresh water. Do not use it for others purposes.
Note : This product is not suitable for continuous pump
operation (e.g. continuous circulation in a pond) or as a
stationary installations (e.g. lifting device, fountain pump).
• Fresh water up to a certain degree of soiling
• Water with a degree of contamination up to a grain size of 20 mm
After unwrapping the packing, make sure that the product is complete with its accessories (if any). If
product is damaged or has any defect, please do not use it and bring back it to your dealer.
If you give this product to another people, please give him also this instruction manual.
How it works
1
Contents
1.
2. Safety Instructions
3. Technical data
4. Assembly
5. Transportation
6. Wintering
7. Storage
8. Maintenance
9. End of life
10. Warranty
11. CE declaration of conformity
Intended use of Evacuation pump
dirty water 1000W