189
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
Introduction
Thank you for choosing this product. Upon designing and manufacturing our products, we place all
of our eorts into ensuring an excellent quality that meets the needs of the users. Following these
instructions allow to optimize the lifetime
IMPORTANT! IN ORDER TO OBTAIN THE UTMOST SATISFACTION FROM THIS PRODUCT UPON
SETTING IT UP, USING IT, AND MAINTAINING IT, WE RECOMMEND THAT YOU CAREFULLY READ
THIS USER MANUAL BEFORE USING THE PRODUCT. PLEASE PAY ATTENTION TO BASIC WARNINGS
RELATING TO SAFETY WITHIN THIS MANUAL, AND KEEP THE MANUAL FOR LATER REFERENCE.
IMPORTANT, KEEP THE MANUAL FOR LATER REFERENCE: READ
CAREFULLY
1. INTENDED USE OF AUTO RAIN WATER PUMP 550W
The product is mainly intended for irrigation or pumping rain water from barrel or tank. Do not use it for
others purposes.
Note : This product is not suitable for continuous pump
operation (e.g. continuous circulation in a pond) or as a
stationary installations (e.g. lifting device, fountain pump).
Approved feed uids
• Fresh water up to a certain degree of soiling
After unwrapping the packing, make sure that the product is complete with its accessories (if any). If the
product is damaged or has any defect, please do not use it and bring back it to your dealer.
If you give this product to another people, please give him also this instruction manual.
How it works
The operating principle of the pumps is based on increasing the uid pressure in the discharge pipe. The
uid enters through the pump inlet to the center of the impeller. Under the action of centrifugal forces,
the uid velocity increases, thus creating a pressure in the discharge port. The result is that the uid in the
pump begins to ow through the pump outlet.
Contents
1. Intended use of Auto rain water pump 550W
2. Safety Instructions
3. Technical data
4. Assembly
5. Transportation
6. Wintering
7. Storage
8. Maintenance
9. End of life
10. Warranty
11. CE declaration of conformity
1
To Next Page
Loading...
